http://docs.mitechisys.com/ 2026-10-04T21:53:33+00:00 http://docs.mitechisys.com/ http://docs.mitechisys.com/lib/tpl/dokuwiki/images/favicon.ico text/html 2020-06-29T13:16:04+00:00 http://docs.mitechisys.com/doku.php?id=installation:wascomat:compass&rev=1593436564&do=diff Wascomat/Electrolux Compass Washers This installation covers Wascomat/Electrolux Compass and Compass Pro washers (the ones with the knob). * Reader * Backplate * Cable harness * Before proceeding, you should assign numbers to each of the machines in the laundry room/building. It is highly recommended that you place number labels on each washer and dryer machine. * Set the machine type and number using the DIP switch on the reader circuit board: See DIP switch settings page to… text/html 2019-07-25T17:42:42+00:00 http://docs.mitechisys.com/doku.php?id=installation:wascomat:compassdryer&rev=1564076562&do=diff Electrolux Compass Pro Dryer This installation covers Electrolux Compass Pro Single and Stack Dryers. * Reader For stack dryers, the readers have back-plates that differ between the left and right versions: For single dryers, the readers use a special mounting bracket: * Cable harness (3-wire) text/html 2019-10-10T13:14:38+00:00 http://docs.mitechisys.com/doku.php?id=installation:wascomat:crossover&rev=1570713278&do=diff Wascomat Encosure/Crossover Washers This installation covers Wascomat Encore/Crossover washers (very different from Encore/Crossover dryers). The reader uses serial communication to communicate with the machine. Both card and coin models are covered. text/html 2019-10-10T13:22:01+00:00 http://docs.mitechisys.com/doku.php?id=installation:wascomat:crossover_dryer&rev=1570713721&do=diff Wascomat Encore/Crossover Dryer This installation covers Wascomat Encore/Crossover Dryer. The reader for these dryers use a basic pulse interface to add dry time when the card is presented. The connection to the Encore dryer is a little different from the Encore washer. text/html 2019-10-22T20:08:36+00:00 http://docs.mitechisys.com/doku.php?id=installation:wascomat:gen4washers&rev=1571774916&do=diff Wascomat Gen4 washers This installation note covers the old Gen6 washers. These washers use mechanical timers. The reader therefore uses a high voltage relay to control this timer. The reader is powered by a separate AC-DC power supply adapter (provided with the order) text/html 2019-08-23T15:07:12+00:00 http://docs.mitechisys.com/doku.php?id=installation:wascomat:gen6washers&rev=1566572832&do=diff Wascomat Gen6 washers This installation note covers the old Gen6 washers. These washers use mechanical timers. The reader therefore uses a high voltage relay to control this timer. The reader is powered by a separate AC-DC power supply adapter (provided with the order) text/html 2019-03-13T14:03:05+00:00 http://docs.mitechisys.com/doku.php?id=installation:wascomat:tdxxxxx&rev=1552485785&do=diff Wascomat TD30x30/TD45x45 dryers This installation covers Wascomat TD30x30/TD45x45 dryers, and Electrolux dryers that look exactly the same. * Reader * Cable harness (4-wire) * Power supply adapter * Before proceeding, you should assign numbers to each of the machines in the laundry room/building. It is highly recommended that you place number labels on each washer and dryer machine. * Set the machine type and number using the DIP switch on the reader's circuit board: See DI…