http://docs.mitechisys.com/ 2026-10-04T21:53:35+00:00 http://docs.mitechisys.com/ http://docs.mitechisys.com/lib/tpl/dokuwiki/images/favicon.ico text/html 2020-08-18T14:40:57+00:00 http://docs.mitechisys.com/doku.php?id=installation:alliance:cardready&rev=1597761657&do=diff Speed-Queen Card-ready models This installation note covers Card-ready models (sometimes called “Card Prep”) manufactured by Alliance, which can include the following brands: Speed-Queen, Huebsch, IPSO. Card-ready models have either a slot a card slot (small chassis variety) or a hole (larger machines). Examples of target machines: text/html 2018-04-20T15:41:00+00:00 http://docs.mitechisys.com/doku.php?id=installation:alliance:coinready&rev=1524238860&do=diff Alliance, Serial, Coin models This installation document covers Coin models (sometimes called “Coin Prep”) with a serial interface from Alliance. Brands include Speed-Queen, Huebsch, IPSO. Continental-Girbau dryers are included. The reader goes in place of the coin-drop and should fit nicely without any drilling. Machines of various shapes and sizes are covered by this guide. Below are a few samples: text/html 2017-06-29T21:27:19+00:00 http://docs.mitechisys.com/doku.php?id=installation:alliance:crossover&rev=1498771639&do=diff need to remove this page text/html 2017-01-24T05:02:21+00:00 http://docs.mitechisys.com/doku.php?id=installation:alliance:e-mech&rev=1485234141&do=diff Huebsch/Speed-Queen E-Mech Coin-ready models This installation note covers Coin-ready (or “Coin Prep”) models of Huebsch and Speed-Queen E-Mech machines. These machines are sometimes referred to as “Hybrid”. They are different from the ACA-type and from MDC/Quantum-type. text/html 2020-05-18T00:51:38+00:00 http://docs.mitechisys.com/doku.php?id=installation:alliance:edcdryer&rev=1589763098&do=diff Huebsch EDC Dryer This installation covers Huebsch EDC stack dryers. * Reader * Cable harness * Before proceeding, you should assign numbers to each of the machines in the laundry room/building. It is highly recommended that you place number labels on each washer and dryer machine. * Set the machine type and number using the DIP switch on the MCU circuit board: See DIP switch settings page to understand how to configure DIP switch positions to set the machine type (washer or dryer… text/html 2020-04-18T18:41:05+00:00 http://docs.mitechisys.com/doku.php?id=installation:alliance:netmasterdryer&rev=1587235265&do=diff SpeedQueen Netmaster Dryer This installation covers Speed-Queen Netmaster stack dryers. * Reader * Cable harness * Before proceeding, you should assign numbers to each of the machines in the laundry room/building. It is highly recommended that you place number labels on each washer and dryer machine. * Set the machine type and number using the DIP switch on the MCU circuit board: See DIP switch settings page to understand how to configure DIP switch positions to set the machine ty… text/html 2020-11-12T03:27:39+00:00 http://docs.mitechisys.com/doku.php?id=installation:alliance:quantumtouch&rev=1605151659&do=diff Quantum Touch Installation This installation note covers Quantum Touch controls.   * Turn machine power OFF! * Before proceeding, you should assign numbers to each of the machines in the laundry room/building. * Set the machine type and number using the DIP switch on the back of the card reader: See DIP switch settings page for more info. * Mount the reader and connect cable harness to the machine control (signal connector and 2-pin power connector to the 24Vac transformer… text/html 2020-03-01T21:54:40+00:00 http://docs.mitechisys.com/doku.php?id=installation:alliance:scxx&rev=1583099680&do=diff Speed-Queen/Huebsch SCxxMD/HCxxMD washers This installation covers Speed-Queen/Huebsch washers with Mechanical controls that have a digital coin board. * Reader * Cable harness * High Voltage sensor (this tells the card reader that the machine is busy) text/html 2020-04-22T20:43:05+00:00 http://docs.mitechisys.com/doku.php?id=installation:alliance:scxxb&rev=1587588185&do=diff Speed-Queen SCxxB washers (B-micro) This installation covers Speed-Queen/Huebsch washers with B-micro controls. * Reader * Cable harness * Power supply adapter for the reader * Before proceeding, you should assign numbers to each of the machines in the laundry room/building. It is highly recommended that you place number labels on each washer and dryer machine. * Set the machine type and number using the DIP switch on the back of the card reader: See DIP switch settings page … text/html 2020-03-01T21:24:17+00:00 http://docs.mitechisys.com/doku.php?id=installation:alliance:scxxmy&rev=1583097857&do=diff Speed-Queen/Huebsch SCxxMY/HCxxMY washers This installation covers Speed-Queen/Huebsch washers with Mechanical controls (without a digital coin board). A high voltage relay is used to control the mechanical timer of the machine. * Reader * Cable harness * High Voltage sensor (this tells the card reader that the machine is busy) * High voltage relay (this controls the mechanical timer) * Power supply adapter for the reader text/html 2020-04-18T18:32:02+00:00 http://docs.mitechisys.com/doku.php?id=installation:alliance:scxxn&rev=1587234722&do=diff Speed-Queen SCxxN washers (Netmaster) This installation covers Speed-Queen/Huebsch washers with Netmaster controls (Shown above is a card-ready version with an ESD reader - just for reference) * Reader * Cable harness * Before proceeding, you should assign numbers to each of the machines in the laundry room/building. It is highly recommended that you place number labels on each washer and dryer machine. * Set the machine type and number using the DIP switch on the back of the c… text/html 2013-10-21T19:08:37+00:00 http://docs.mitechisys.com/doku.php?id=installation:alliance:sinc_module&rev=1382382517&do=diff Sinc module installation (Work-in-progress) text/html 2013-10-05T20:42:33+00:00 http://docs.mitechisys.com/doku.php?id=installation:alliance:start&rev=1381005753&do=diff This is the top level page for installation instructions for for various machines from Alliance, including: * Coin-ready Huebsch/Speed-Queen * Card-ready Huebsch/Speed-Queen text/html 2021-02-14T03:20:13+00:00 http://docs.mitechisys.com/doku.php?id=installation:alliance:syt_mc10&rev=1613272813&do=diff SYT models with MC10 controls This installation covers Alliance/Primus washers with MC10 controls * Reader * Cable harness * High voltage sensor The cable harness has 6 wires. Two wires are for Power; two wires for the START signal; and two wires for the BUSY signal. The BUSY signal connects to an auxiliary component called the High Voltage sensor, which connects to the machine.