http://docs.mitechisys.com/ 2026-10-04T21:39:50+00:00 http://docs.mitechisys.com/ http://docs.mitechisys.com/lib/tpl/dokuwiki/images/favicon.ico text/html 2014-12-10T23:00:47+00:00 http://docs.mitechisys.com/doku.php?id=bridge&rev=1418252447&do=diff Mitech Bridge and Tablet overview Note: this note is only applicable to older, tablet-based systems. Most of the interface to the system is provided by an application on the Android-based tablet computer inside of the VAC. This application is called Mitech Bridge, whose main administration screen is shown below: text/html 2015-05-04T22:38:27+00:00 http://docs.mitechisys.com/doku.php?id=cad&rev=1430779107&do=diff Cashless VAC with side PINpad text/html 2020-04-29T18:10:52+00:00 http://docs.mitechisys.com/doku.php?id=card_management_software&rev=1588183852&do=diff CMS is a Windows-based application for configuring certain parts of the system. It is targeted at and provided to laundry route operators. The Laundroworks system comes with six different System cards, a USB card reader, and a Windows software application called Card Management Software (CMS). These tools allows the operator to perform certain management functions such as setting machine cycle prices, running free wash/dry cycles to test equipment, and writing a balance to a user card directl… text/html 2017-11-30T03:57:29+00:00 http://docs.mitechisys.com/doku.php?id=downloads&rev=1512014249&do=diff Printer paper specification: text/html 2019-10-20T22:51:13+00:00 http://docs.mitechisys.com/doku.php?id=getting_started&rev=1571611873&do=diff The Getting Started Guide can be downloaded here: text/html 2015-09-28T01:00:56+00:00 http://docs.mitechisys.com/doku.php?id=quick_reference_guide&rev=1443402056&do=diff The Getting Started Guide can be downloaded here: text/html 2014-12-10T22:57:28+00:00 http://docs.mitechisys.com/doku.php?id=router&rev=1418252248&do=diff Note: this note is only applicable to older, tablet-based systems which use a router. Generally Mitech pre-configures the router with all necessary settings. You may need to access and/or change router settings if A)you need to change how the router connects to the internet (Ethernet wire or 3G cell modem) or B)you want to check 3G modem signal strength. text/html 2020-12-16T18:32:57+00:00 http://docs.mitechisys.com/doku.php?id=sidebar&rev=1608143577&do=diff General Getting Start Guide DIP Switch settings Card Reader Installation Alliance (Speed-Queen/Huebsch) Alliance, Serial, Card-Ready Alliance, Serial, Coin-drop Alliance, Quantum Touch Speed-Queen/Econ-o, E-Mech Hybrid SCxxMD (Mechanical w/digital board) text/html 2020-02-04T01:14:58+00:00 http://docs.mitechisys.com/doku.php?id=start&rev=1580778898&do=diff This website provides various documentation about the Laundroworks card system. Use the navigation menu on the left or click Sidebar if browsing from a mobile device. text/html 2015-02-23T16:13:45+00:00 http://docs.mitechisys.com/doku.php?id=troubleshooting&rev=1424708025&do=diff Troubleshooting Guide Value Add Center is down Open the VAC door and note the LED lights the primary computer board, which is mounted to the door. Under normal operation, the following must be observed: * There is a solid Red and linking Blue LED on the smaller daughter board. If there is no blink Blue LED, remove the daughter board and plug-it back in (we have noticed that on a couple of occasions there is bad contact between the daughter board and main board) * The LED lights correspo… text/html 2019-03-21T19:26:31+00:00 http://docs.mitechisys.com/doku.php?id=troubleshooting_internal&rev=1553196391&do=diff Troubleshooting Card System Installation Readers not visible on the Portal First, readers need to be activated (if card reader says “No Activated” this means reader is not activated). Second, VAC01 needs to be online since it acts as gateway for all readers. Third, 7-digit Location ID of the reader must be the same as 7-digit Location ID of the VAC; in other words the same activation card should have been used on both. Ask customer to use the Service card on the equipment to confirm the loca…